Call the Service Wizards
(519) 835-2436

Navien Accessories

Navien Accessories

Part Number: (PFFW-SXX-001)

NaviCirc is a simple plumbing device that uses the existing hot and cold water lines to reduce the wait time for hot water at the faucet without the need for a dedicated recirculation return line.

3 Years warranty from date of purchase.

Part Number: (30022965A)

NaviCirc Valve Kit includes the NaviCirc Valve (PFFW-SXX-001) and two 1/2" x 3/8" flexible hoses and adapters.

3 Years warranty from date of purchase.

Part Number: (PBCM-AS-001)

This add-on accessory will enable customers with smartphones and tablets to control temperatures remotely, access usage data and receive diagnostic notifications on all Navien products (NPE, NPE-2, NPN-U, NPN-E, NCB-E, NCB-H, NFC, NFC-H, NFB, NFB-H, NFB-C, NHB, NHB-H and NHW-A).

3 year warranty from date of purchase.

Part Number: (GXXX001659)

NaviLink cable. Allows you to expand your NaviLink control to a maximum of 3 channels for monitoring 3 banks of 8 units. Requires NaviLink Control.

90 day warranty from date of purchase.

HotButton™ RECIRCULATION SYSTEM

Optional on-demand recirculation system for Navien NPE-A2 condensing tankless water heaters

At the push of a button, the Navien HotButton activates the internal recirculation pump and gas fired burner to heat water in supply lines. This gives your customers hot water when they need it, saving water and money.

Part Number: (PZZZ-00063)

Designed for NPE-A. NPN-U, NPN-E, and NHW-A series. HotButton™ kit allows manual operation of a recirculation pump (ComfortFlow™ on NPE-A). Includes an add-on PCB, 1 push button and wall plate.

3 year warranty from date of purchase.

Part Number: (GXXX001426)

Extra push button for use with HotButton and extra wall plate.

90 day warranty from date of purchase.

Part Number: (GXXX001427)

Extra wall plate for use with HotButton and extra HotButton push buttons.

90 day warranty from date of purchase.

H2Air™ Heating and DHW System

Combination heating and DHW system using NPE-A2 Series condensing tankless water heaters

An add-on accessory for the Navien NPE-A2 Series tankless water heater that creates a high efficiency space heating and endless domestic hot water system

Additional features of the H2Air System
  • Domestic hot water priority or simultaneous domestic hot water and heating.
  • Endless supply of DHW.
  • Adjustable outdoor temperature reset and heating set points.
  • Adjustable pump purge timer.
H2Air Kit includes
  • Controller
  • 13-pin connector cable
  • Outdoor temperature sensor
  • Flow switch for domestic hot water

Part Number: (PNBD-000001)

Designed for NPE-A, NPE-A2, and NHW-A series. Allows for combined space heating and domestic hot water when paired with a recirculation pump (ComfortFlow™ on NPE-A and NPE-A2). Only works with AHU’s.

3 year warranty from date of purchase.

MAGNETIC BOILER FILTER

Navien NaviClean™ magnetic boiler filter for NCB-E series combi-boilers and NHB & NFB series high-efficiency boilers

  • Powerful permanent magnet for removing higher levels of iron oxide, sludge and debris
  • Inlet and outlet ports for rapid in-line installation
  • Tool-free valve connection designed to prevent cross threading
  • Large canister and full flow valves resulting in minimal pressure drop and unrestricted flow
  • Low profile drain valve making installation and service easier
  • 360º rotation allowing flexibility of installation
  • High performance seals providing higher protection against leaks

Description

NaviClean™ is a highly recommended magnetic boiler filter designed to protect hydronic heating systems from the damaging effects of iron oxide sludge and non-magnetic debris.

It is best suited for heating systems with 1" to 1-1/4" copper or black iron pipes. It features a permanent magnet mounted inside the glass reinforced nylon housing.

NaviClean magnetic boiler filters can be installed anywhere on the main system piping. To achieve best performance, it is recommended that the NaviClean be installed after the last heating zone and before the boiler. NaviClean is also fully compatible with Adey chemicals.

Description

  • NaviClean filter
  • (2) 1-1/4" NPT adapters
  • (2) isolation valves
  • (2) valve clips
  • Lid wrench
  • Valve wrench
  • Installation, operation and service manual

How It Works

Part Number: (GXXX001727)

Highly recommended for protecting hydronic heating systems by capturing magnetite and iron oxides. Especially important in retrofit situations where older piping exists.

1 year warranty from date of purchase.